Welcome, Guest
Username: Password: Remember me

TOPIC: Electrolux Washing Machine Fault/Error Codes

Electrolux Washing Machine Fault/Error Codes 2 years 2 months ago #36

  • temich
  • temich's Avatar
  • Offline
  • Administrator
  • Posts: 32
  • Thank you received: 1
Electrolux washing machines have a self diagnosing system that gives out a error when something goes wrong. These errors narrow down the trouble shooting process.


E00 - No Error

E11 - Difficulties in water fill for washing:
Tap closed or water pressure too low; Drain tube improperly
positioned; Water fill solenoid valve is faulty; Leaks from water circuit
on pressure switch; Pressure switch faulty; Wiring faulty; PCB faulty.

E12 - Difficulties in water fill for drying:
Tap closed or water pressure too low; Drain tube improperly
positioned; Water fill solenoid valve is faulty; Leaks from water circuit
on pressure switch; Pressure switch faulty; Wiring faulty; PCB faulty.

E13 - Water Leakage:
Drain hose incorrectly positioned; mains pressure insufficient; water
fill solenoid faulty; leakage/blockage of pressure switch hydraulic
circuit; pressure switch faulty.

E21 - Difficulties in draining for washing:
Drain tube kinked/clogged/improperly positioned; Drain filter
clogged/dirty; Drain pump faulty; Pressure switch faulty; Wiring faulty;
PCB faulty.

E22 - Difficulties in draining for drying:
Drain tube kinked/clogged/improperly positioned; Drain filter
clogged/dirty; Drain pump faulty; Pressure switch faulty; Wiring faulty;
PCB faulty.

E23 - Drain pump triac faulty:
Drain pump faulty; Wiring faulty; PCB faulty.

E24 - Fault in “sensing” circuit of drain
pump triac (wrong input signal to
microprocessor):

PCB faulty.

E31 - Electronic pressure switch circuit
faulty (frequency of pressure switch
signal out of limits):

Electronic pressure switch; Wiring; PCB faulty.

E32 - Incorrect calibration of electronic
pressure switch
(The electronic pressure switch
generates a signal with instable
frequency during the drain phase):

Drain tube kinked/clogged/improperly positioned; Drain filter
clogged/dirty; Drain pump faulty;
Leaks from water circuit on pressure switch; Pressure switch;
Wiring faulty; PCB faulty.

E35 - Water overflow:
Water fill solenoid faulty; Leaks from water circuit on pressure switch; pressure switch faulty; wiring faulty; PCB faulty.

E38 - Pressure chamber blocked
(water level does not vary for at least
30 sec. during drum rotation:

Motor drive belt broken; Hydraulic circuit pressure switch clogged.

E3A - Heating elem. relay sensing faulty
(input signal to microprocessor
always 0V or 5V):

PCB faulty.

E41 - Door open (after 15 sec.):
Door interlock faulty; wiring faulty; PCB faulty.

E42 - Problems of door closure:
Door interlock faulty; wiring faulty; PCB faulty.

E43 - Interlock power supply triac faulty:
Door interlock faulty; wiring faulty; PCB faulty.

E44 - Door interlock sensing circuit triac faulty:
PCB faulty.

E45 - Door interlock sensing circuit triac
faulty (wrong input signal to
microprocessor):

PCB faulty.

E51 - Motor power supply triac short- circuited:
PCB faulty; current leakage from motor or from wiring.

E52 - No signal from motor tachometric generator:
Motor faulty; wiring faulty; PCB faulty

E53 - Motor triac sensing circuit faulty
(input signal to microprocessor
wrong):

PCB faulty.

E54 - Motor relay contacts sticking (high
voltage level when the relay changes
to OFF):

PCB faulty; current leakage from motor or from wiring.

E61 - Insufficient heating during washing:
NTC sensor faulty; heating element faulty; wiring faulty; PCB faulty.

E62 - Overheating during washing
(temperature higher than 88°C for a
time higher than 5 min:

NTC sensor faulty; heating element faulty; wiring faulty; PCB faulty.

E66 - Heating element power relay faulty
(incongruence between sensing and
relay):

PCB faulty.

E68 - Current dispersion to earth (value of
mains voltage different from main
value):

Current dispersion between between heating element and earth.

E69 - Heating element interrupted:
Wiring faulty; Heating element for washing interrupted (thermofuse open).

E71 - Washing NTC sensor faulty (short- circuited or open):
Wiring faulty; Washing NTC sensor faulty; PCB faulty.

E72 - Drying condenser NTC sensor faulty
(voltage value out of limits, sensor
short-circuited or open):

Wiring faulty; Drying NTC sensor (condenser) badly positioned or
faulty; WD board faulty.

E73 - Drying duct NTC sensor faulty
(voltage value out of limits, sensor
short-circuited or open):

Wiring faulty; Drying NTC sensor (duct) badly positioned or faulty;
WD board faulty.

E74 - Washing NTC sensor badly positioned:
Wiring faulty; Washing NTC sensor badly positioned; NTC sensor faulty; PCB faulty.

E82 - Error in selector reset position:
PCB faulty (Wrong configuration data).

E83 - Error in selector reading:
PCB faulty (Wrong configuration data.

E91 - Communication error between PCB and display board:
Wiring faulty; Control/display board faulty: PCB faulty.

E92 - Communication incongruence
between main PCB- display board
(versions not compatible):

Wrong control/display board;
Wrong PCB (do not correspond to the model).

E93 - Incorrect configuration of appliance:
PCB faulty; (Incorrect configuration data).

E94 - Incorrect configuration of washing cycle:
PCB faulty; (Incorrect configuration data).

E95 - Communication error between microprocessor and EEPROM:
PCB faulty.

E97 - Incongruence between program selector and cycle configuration:
Faulty PCB (Wrong configuration data).

EA1 - Drum positioning (DSP) faulty:
Motor belt broken; Wiring faulty; PCB faulty; DSP sensor faulty.

EA6 - DSP door opening faulty:
Motor belt broken; Wiring faulty; Drum cover open. Motor faulty; PCB faulty.

EH1 - Frequency power of appliance out of limits:
Power supply problems (incorrect / disturbance); PCB faulty.

EH2 - Voltage too high:
Power supply problems (incorrect / disturbance); PCB faulty.

EH3 - Voltage too low:
Power supply problems (incorrect / disturbance); PCB faulty.

EF1 - Drain filter blocked (drain phase too long):
Drain tube blocked/kinked/too high; Drain filter dirty/blocked.

EF2 - Excessive detergent dosing or wrong detergent used(excessive foam during draining):
Excessive detergent dosing; drain tube kinked/blocked; Drain filter dirty/blocked.

EF3 - Aqua control intervention:
Water leaks onto base frame; water control system defective.

EF4 - Water fill pressure low, no signal of flow-meter and solenoid valve open:
Tap closed; water fill pressure low.

EF5 - Unbalanced load:
Final spin phases skipped.

EF6 - Reset

EC1 - Solenoid valve blocked with flow-meter working:
Wiring faulty; Solenoid valve faulty/blocked, PCB faulty.

Ed1 - Data communication error between WD board and PCB:
Wiring faulty between PCB and WD board; WD board faulty; PCB faulty.

Ed2 - Drying heating element relay 1 faulty:
Wiring faulty between WD board and thermostats; thermostats faulty; WD board faulty, PCB faulty.

Ed3 - Drying heating element relay 2 faulty:
Wiring faulty between WD board and thermostats; thermostats faulty; WD board faulty, PCB faulty.

Ed4 - Relay which commutates power between washing heating element and drying (in the WD board):
Wiring faulty; WD board faulty; PCB faulty.

Ed6 - No communication between PCB and display board (INPUT):
Wiring faulty between PCB and programme display board; PCB faulty.
Last Edit: 2 years 2 months ago by temich.
The administrator has disabled public write access.
Time to create page: 0.633 seconds