Welcome, Guest
Username: Password: Remember me

TOPIC: Electrolux Dishlex Dishwasher Fault Codes

Electrolux Dishlex Dishwasher Fault Codes 1 year 2 months ago #55

  • temich
  • temich's Avatar
  • Offline
  • Administrator
  • Posts: 32
  • Thank you received: 1
i10 Error - Water Inlet Fault:
Electrolux Dishlex i10 error indicates that the dishwasher has not filled with water.
Possible Causes:
Tap closed; water mains pressure too low; fill solenoid / wiring faulty; hydraulic circuit of pressure switch obstructed; level pressure switch / wiring faulty; circuit board faulty (solenoid triac short-circuited)

i20 Error - Draining Fault:
Dishlex dishwasher i20 error indicates that the machine was not able to drain the water.
Possible Causes:
Clogged filter, jammed pump, blockage in hose, faulty drain pump.

i30 Error - Leak Fault:
Dishlex dishwasher i30 error indicates flood switch has been activated by a possible leak.

i50 Error - Motor Triac Fault:
Dishlex dishwasher i50 error indicates that the motor triac on the main control board short circuited.

i60 Error - Heating Fault:
Dishlex dishwasher i60 error indicates that the dishwasher failed to heat the water.

i70 Error - NTC Sensor Fault:
Dishlex dishwasher i70 error indicates that the NTC sensor short-circuited or open.

i80 Error - Communication Fault:
Dishlex dishwasher i80 error indicates a communication error between the main control board and display input board.


i90 Error - Software Fault:
Dishlex dishwasher i90 error indicates a problem with software configuration.
Last Edit: 1 year 1 month ago by temich.
The topic has been locked.
Time to create page: 0.284 seconds